PHYSICO – MECHANICAL MEASUREMENT LABORATORY

Physico – Mechanical Measurement Laboratory (Technical Division 3 – K3) provides verification, calibration and measuring equipment testing services in the following physico – mechanical fields:
1. Weight
2. Force
3. Pressure
4. Volume – Flow
5. Length
Our systems and devices satisfy requirements of measurement traceability of national references and are compatible with the international standards. The environmental conditions are always maintained to conform to strict requirements of each metrology procedure.
In addition, we have been supplying various additional services for the customers such as on-site surveys and testing, equipment delivery upon request, expert training, consulting and repairing…

DECISIONS, DESIGNATIONS
1. Decision No. 60/2014/QĐ-VPCNCL dated 25/02/2014 issued by Bureau of Accreditation (BoA) on the accreditation of the laboratory to conform with the requirements of ISO/IEC 17025:2005; No.: VILAS 024.
2. Certificate No. 1407/TĐC-ĐL dated 30/06/2016 issued by Directorate for Standards, Metrology and Quality, providing services of verification, calibration, testing of measuring equipment, measurement standards; No.: ĐK 02.
3. Designation No. 1232/QĐ-TĐC dated 30/06/2016 issued by Directorate for Standards, Metrology and Quality as the organization performing verification, calibration, testing of measurement devices, metrology standards.
4. Decision No. 2290/QĐ-TĐC dated 12/12/2016 issued by Directorate for Standards, Metrology and Quality on certifying measurement standards used to verify the measuring equipment.

Main device list (click to see more)
N0 Equipment Technical Specification Code Manufacturer

 

(1) (2) (3) (4) (5)
I Weight      
1 Comparator AX 16 22 g/0,001 mg TB/KT2-K3/K.S01 Switzerland
2 Comparator XP 205 220 g/0,01 mg TB/KT2-K3/K.S02 Switzerland
3 Comparator CC310 300 g/0,01 mg TB/KT2-K3/K.S03 Germany
4 Comparator SBC 22 210 g/0,1 mg TB/KT2-K3/K.S04 Germany
5 Comparator AX 1004 1109 g/0,1 mg TB/KT2-K3/K.S05 Switzerland
6 Comparator PR 1003 10 kg/1 mg TB/KT2-K3/K.S06 Switzerland
7 Comparator KA30-3/P 30 kg/2 mg TB/KT2-K3/K.S07 Switzerland
8 Comparator CCE 60K2 64 kg/10 mg TB/KT2-K3/K.S08 Switzerland
9 Weights of classes E2 (1¸500) mg TB/KT2-K3/K.S09 Switzerland
10 Weights of classes E2 (1¸500) g TB/KT2-K3/K.S10 Switzerland
11 Weights of classes E2 (1¸20) kg TB/KT2-K3/K.S12 Switzerland
12 Weights of classes F1 1 mg ¸ 10 kg TB/KT2-K3/K.W01 Switzerland
13 Weights of classes F1 (1¸ 500) g TB/KT2-K3/K.W02 Vietnam
14 Weights of classes F1 (1 ¸ 20) kg TB/KT2-K3/K.W03 Vietnam
15 Weights of classes F1 (1  ¸ 500) g TB/KT2-K3/K.W04 Poland
16 Weights of classes F2 (1  ¸ 200) g TB/KT2-K3/K.W05 USSR
17 Weights of classes F2 (1 ¸ 20) kg TB/KT2-K3/K.W07 Vietnam
18 Weights of classes M1 (1 ¸ 20) kg TB/KT2-K3/K.W08 Germany
19 Weights of classes M1 (5,10,20) kg TB/KT2-K3/K.W09 Vietnam
20 Weights of classes M1 500 kg/weight TB/KT2-K3/K.W10 Vietnam
II Force      
1 Loadcell SST 201 KNC 200 kN/0,24 TB/KT2-K3/F.W01 USA
2 Loadcell SST 501 KNC 500 kN/0,24 TB/KT2-K3/F.W02 USA
3 Loadcell SST 102 KNC 1000 kN/0,24 TB/KT2-K3/F.W03 USA
4 Loadcell SST 202 KNC 2000 kN/0,24 TB/KT2-K3/F.W04 USA
5 Loadcell SST 302 KNC 3000 kN/0,24 TB/KT2-K3/F.W05 USA
6 Loadcell SST 502 KNC 5000 kN/0,24 TB/KT2-K3/F.W06 USA
7 Loadcell LRCN 730 1000 kN/0,24 TB/KT2-K3/F.W07 USA
8 Loadcell LRCN 730 500 kN/0,24 TB/KT2-K3/F.W08 USA
9 Loadcell LRCN 710 50 kN/0,24 TB/KT2-K3/F.W09 USA
10 Loadcell LRCN 710 20 kN/0,24 TB/KT2-K3/F.W10 USA
11 Loadcell LRCN 710 10 kN/0,24 TB/KT2-K3/F.W11 USA
12 Loadcell LRCN 710 5 kN/0,24 TB/KT2-K3/F.W12 USA
13 Loadcell LRCN 710 2 kN/0,24 TB/KT2-K3/F.W13 USA
14 Loadcell LRCN 710 1 kN/0,24 TB/KT2-K3/F.W14 USA
15 Mechanical Loadcell 2000 kN/0,24 TB/KT2-K3/F.W15 Germany
16 Tensile – compress testing machines 2000 kN TB/KT4 USA
III Pressure
1 Pressure balances CPB 5000 (2¸1000)bar/ 0,015 TB/KT2-K3/A.S05 Germany
2 Pressure balances SI-9000 35 bar (1¸35) bar/ 0,015 TB/KT2-K3/A.SO3 UK
3 Pressure balances SI-9000 75 bar (2¸75) bar/ 0,015 TB/KT2-K3/A.SO2 UK
4 Pressure balances SI-9000 350 bar (5¸350) bar/ 0,015 TB/KT2-K3/A.SO1 UK
5 Pressure balances SI-9000 700 bar (10¸700) bar/ 0,015 TB/KT2-K3/A.SO4 UK
6 Digital pressure gauge DPI 610 (-1¸20) bar/ 0,025 TB/KT2-K3/A.S06 USA
7 Pressure sensor with DPI 610 (-70¸70) mbar/ 0,025 TB/KT2-K3/A.S06-1 USA
8 Pressure sensor with DPI 610 (0¸700) mbar/ 0,025 TB/KT2-K3/A.S06-2 USA
9 Pressure sensor with DPI 610 (0¸700) mbar/ 0,025 TB/KT2-K3/A.S06-3 USA
10 Pressure sensor with DPI 610 (0¸70) bar/ 0,025 TB/KT2-K3/A.S06-4 USA
11 Pressure sensor with DPI 610 (0¸350) bar/ 0,025 TB/KT2-K3/A.S06-5 USA
12 Pressure sensor with DPI 610 (0¸700) bar/ 0,025 TB/KT2-K3/A.S06-6 USA
13 Digital pressure gauge DPI 610 (-1¸20)bar/ 0,025 TB/KT2-K3/A.S07 USA
14 Digital pressure gauge PC6-0020-Pro (-1¸20)bar/

0,025

TB/KT2-K3/A.W03 UK
15 Digital pressure gauge PC6-1000-C (0¸1000)bar/

0,025

TB/KT2-K3/A.W02 UK
16 Pressure sensor with PC6 (0¸40)bar/

0,025

TB/KT2-K3/A.W02-1 UK
17 Pressure sensor with PC6 (0¸200)bar/

0,025

TB/KT2-K3/A.W02-2 UK
18 Pressure sensor with PC6 (0¸350)bar/

0,025

TB/KT2-K3/A.W02-3 UK
19 Pressure sensor with PC6 (0¸700)bar/

0,025

TB/KT2-K3/A.W02-4 UK
20 Pressure sensor with PC6 (0 ¸1000)bar/

0,025

TB/KT2-K3/A.W02-5 UK
IV Volume – flow
  Standard vessel class II (250,500,1000,2000)mL/0,1 TB/KT2-K3/D.S01 Quatest3
  Standard vessel class I 5L/0,02 TB/KT2-K3/D.S02 VMI
  Standard vessel class I 50L/0,02 TB/KT2-K3/D.S03 VMI
  Standard vessel class I 100L/0,02 TB/KT2-K3/D.S04 VMI
  Standard vessel class I 200L/0,02 TB/KT2-K3/D.S05 VMI
  Standard vessel class II 2L/0,1 TB/KT2-K3/D.W01 VMI
  Standard vessel class II 5L/0,1 TB/KT2-K3/D.W02 VMI
  Standard vessel class II 10L/0,1 TB/KT2-K3/D.W03 VMI
  Standard vessel class II 20L/0,1 TB/KT2-K3/D.W04 VMI
  Standard vessel class II 50L/0,1 TB/KT2-K3/D.W05 VMI
  Standard vessel class II 100L/0,1 TB/KT2-K3/D.W06 VMI
  Standard vessel class II 200L/0,1 TB/KT2-K3/D.W07 VMI
  Standard vessel class II 3000L/0,1 TB/KT2-K3/D.W08 VMI
V Length      
1 Standard line scales 1000 mm/1 mm TB/KT2-K3/L.W01 Germany
2 Gauge Block (0,5¸100) mm TB/KT2-K3/L.W02 Germany
3 Panme (0¸25) mm 0.002mm TB/KT2-K3/LW03 Russia
4 Dial indicator calibration device 1 mm TB/KT2-K3/LW04 Germany
5 Magnifying glass 0,1 mm TB/KT2-K3/LW05 Japan
TT Name of measuring equipment/ device Technical specification Precedure Note
I WEIGHT
IV.1 Platform scales to 500 kg, Class: 3 ĐLVN 14:2009 / KT2.K3.HC-02/K Verification/ Calibration
to 1.000 kg, Class: 3
to 5.000 kg, Class: 3
IV.2 Bench weight scales to 20 kg, Class: 3 ĐLVN 15:2009 / KT2.K3.HC-02/K Verification/ Calibration
> 20 kg, Class: 3
IV.3 Spring dial scales (0 ÷ 200) kg, Class: 4 ĐLVN 30:2009 Verification
IV.4 Crane scales Class: 3 KT2.K3.HC-03/K Calibration
IV.5 Analytical balances Class: 1 ĐLVN 16:2009 / KT2.K3.HC-01/K Verification/ Calibration
IV.6 Technical balances Class: 2
IV.7 Weighbridges To 80 tons ĐLVN 13:2009 / KT2.K3.HC-02/K Verification/ Calibration
> 80 tons Verification
IV.8 Weighbridges testing to 80 tons ĐLVN 100:2009 Testing
 > 80 tons
IV.9 Platform scales testing to 10 tons ĐLVN 100:2009 Testing
IV.10 Bench weight scales testing to 60 kg ĐLVN 100:2009 Testing
IV.11 Belt weighers to 60 tons/h ĐLVN 03:2009 / KT2.K3.HC-04/K Verification/ Calibration
IV.12 Weighing system of concrete batching plant to  80 m3/h KT2.K3.HC-05/K Calibration
(80 ÷ 120) m3/h
IV.13 Weights of class F1 (1 ÷ 500) mg, Class: F1 ĐLVN 50:2009 / ĐLVN 99:2002 Verification/ Calibration
(1 ÷ 500) g, Class: F1
(1 ÷ 20) kg, Class: F1
IV.14 Weights of class F2 (1 ÷ 500) mg, Class: F2 ĐLVN 47:2009 / ĐLVN 99:2002 Verification/ Calibration
(1 ÷ 500) g, Class: F2
IV.15 Weights of class M1, M2 (1 ÷ 500) g, Class: M1
(1 ÷ 20) kg, Class: M1, M2
500 kg, Class: M1
II FORCE
I.1 Tensile – compress testing machines to 30 tons ĐLVN 109:2002 Calibration
(30 ÷ 200) tons
I.2 Force measuring devices  to 10 tons ĐLVN 108:2002 Calibration
to 20 tons
I.3 Torque  measuring devices to 1500 N.m ĐLVN 110:2002 Calibration
I.4 Hydraulic lift jacks for measure E to 20 tons ĐLVN 108:2002 Calibration
I.5 Hydraulic push off jacks (25 ÷ 50) tons ĐLVN 108:2002 Calibration
 

I.6

Hydraulic cable pull jacks to 250 tons ĐLVN 108:2002 Calibration
to 500 tons
I.7 Mortar mixers KT2.K3.TN-03/L Testing
I.8 Ballast modeling machine KT2.K3.TN-04/L Testing
I.9 Pile presses machines To 500 tons ĐLVN 108:2002 Calibration
I.10 Torque wrenches \ ĐLVN 110:2002 Calibration
I.11 Concrete strength testing equipment (10 ÷ 100) R ĐLVN 150:2004 Calibration
I.12 CBR/Marshall Machines (30 ÷ 100 ) kN ĐLVN 108:2002 Calibration
I.13 Soil cutting machine to 140 daN ĐLVN 108:2002 Calibration
I.14 Trilogy machines (12.5 ÷ 1600) kPa ĐLVN 108:2002 Calibration
I.15 First machines (12.5 ÷ 800) kPa ĐLVN 108:2002 Calibration
I.16 Rubber hardness measuring machines 0 ÷ 100 KT2.K3.HC-05/F Calibration
I.17 Steel hardness measuring machines to 60 HRC KT2.K3.HC-06/F Calibration
III PRESSURE
III.1 Pressure gauges for Oxygen (Air)  (0 ÷ 1.000) bar, Accuracy 1 to 6% ĐLVN 08:2011 / ĐLVN 76:2001 Verification/ Calibration
III.2 Pressure gauges for liquid (0 ÷ 600) bar, Accuracy 1 to 6% ĐLVN 08:2011 / ĐLVN 76:2001 Verification/ Calibration
III.3 Pressure gauges for Oxygen (Air) (0 ÷ 1.000) bar, Accuracy 0,16 to 0,6% ĐLVN 54:2009 /
ĐLVN 76:2001
Verification/ Calibration
III.4 Pressure gauges for liquid (0 ÷ 1.000) bar, Accuracy 0,16 to 0,6% ĐLVN 54:2009 / ĐLVN 76:2001 Verification/ Calibration
III.5 Aneroid pressure gauges (0 ÷ 10) bar, Accuracy 1 to 6% ĐLVN 08:2004 / ĐLVN 76:2001 Verification/ Calibration
III.6 Water column pressure gauges (0 ÷ 1,5) bar, Accuracy 1 to 2,5% ĐLVN 08:2011 / ĐLVN 76:2001 Verification/ Calibration
III.7 Mercury column pressure gauges (0 ÷ 1) bar, Accuracy 1 to 2,5% ĐLVN 08:2011 / ĐLVN 76:2001 Verification/ Calibration
III.8 Pressure – vacuum gauges (-1 ÷ 1) bar, Accuracy 1 to 6% ĐLVN 08:2011 / ĐLVN 76:2001 Verification/ Calibration
III.9 Micro pressure gauges Accuracy 1%; 2% ĐLVN 08:2011 /
KT2.K3.HC-01/A
Verification/ Calibration
III.10 Spring and mercury Sphygmomanometers (0 ÷ 300) mmHg, Accuracy 1 to 2,5% ĐLVN 09:2011 Verification
III.11 Digital standard Sphygmomanometers (0 ÷ 300) mmHg ĐLVN 54:2009 Verification/ Calibration
III.12 Relief and safety Valves (0 ÷ 25) bar KT2.K3.TN-01/A Testing
III.13 Pressure Transducer and Transmitter To 1000 bar ĐLVN 112:2002 Calibration
III.14 Pressure switches To 1000 bar ĐLVN 113:2004 Calibration
III.15 Digital Pressure gauges To 1000 bar, Accuracy 0,05 to 0,6% ĐLVN 163:2013 / ĐLVN 76:2001 Verification/ Calibration
IV VOLUME
V.1 Casks (0 ÷ 20) L, Class: 0,5 KT2.K3.TN-01/D Testing
V.2 Barrels (0 ÷ 20) L, Class: 0,5 KT2.K3.TN-02/D Testing
V.3 Barrels to 50 L, Class: 0,5 KT2.K3.TN-03/D Testing
to 100 L, Class: 0,5
> 100 L, Class: 0,5
V.4 Barrels to 50 L, Class: 0,5 KT2.K3.TN-04/D Testing
to 100 L, Class: 0,5
> 100 L, Class: 0,5
V.5 Horizontal Cylindrical tanks to 10 m3 ĐLVN 29:2008 Verification
to 20 m3
> 20 m3
V.6 Vertical Cylindrical tanks to 500 m3 ĐLVN 28:2008 Verification
to 1000 m3
> 1000 m3
V.7 Fuel dispensers Class: 0,5 ĐLVN 10:2013 Verification
V.8 Flow meters for oils and oil products DN to 50 mm, Class: 0,5 ĐLVN 22:2014 / ĐLVN 94:2009 Verification/ Calibration
DN to 100mm, Class: 0,5
DN to 150 mm, Class: 0,5
V.9 Standard vessel class 2 to 20 L ĐLVN 57:2009 Verification
50 L
100 L
200 L
500 L
1000 L
2000 L
5000 L
V.10 Diaphragm gas meter Type G1.6 ĐLVN 155:2005 Verification
V.11 Meter for cold potable water DN to 100 mm ĐLVN 17:2009 / KT2.K3.HC-01/D / KT2.K3.HC-02/D Verification/ Calibration
DN to 150 mm
DN to 250 mm
DN to 300 mm
V LENGHT
II.1 Micrometer calipers (0 ÷ 25) mm KT2.K3.HC-02/L Calibration
II.2 Vernier calipers to 300 mm KT2.K3.HC-01/L Calibration
 (300 ÷ 600) mm
II.3 Measuring tapes to 10 m KT2.K3.HC-03/L Calibration
(10 ÷ 50) m
II.4 Dial indicators (0 ÷ 50) mm KT2.K3.HC-05/L Calibration
II.5 BENKELMAN rod Scale 2/1 KT2.K3.TN-05/L Testing
II.6 Commercial rule to 1 m KT2.K3.HC-04/L Calibration
II.7 Taximet \ ĐLVN 01:2010 Verification
II.8 Asphalt needle to 50 mm KT2.K3.TN-01/L Testing
II.9 VIKA Tools to 40 mm
Weight: 300 ± 1 g
KT2.K3.TN-02/L Testing
II.10 Test sieves  to 100 mm KT2.K3.TN-07/L Testing
II.11 Thickness measuring devices \ KT2.K3.HC-06/L Calibration
II.12 Innermicrometers \ ĐLVN 149:2004 Calibration
II.13 Counting meters \ KT2.K3.HC-03/L Calibration
II.14 Distance measuring devices \ KT2.K3.HC-03/L Calibration

QUALITY ASSIURENCE AND TESTING CENTRE 2 – Technical Division 3
Điện thoại: 0236.3831049;
Fax: 0236.3910064;
Email: k3@quatest2.com.vn


Call Now Button